*** Fits 31 spline Borg Warner 1356 and 1345 front output shafts ***

Northern Drivetrain 00193
	Quantity in Basket: None Code: NDT-00193 Price: $197.68 5 In Stock
	Quantity:
Companion Flange - Splined Bore 1330 series, Ø1.406x31 spline, Ø1.885 hub diameter 4.25 and 3.50 BC, Ø2.00-M pilot

This flat flange can be used to replace a broken 1330 or other front CV yoke on the 31 spline Borg Warner 1356 and 1345 transfer case. Check your spline counts carefully, as 32 splines were also used. Driveshaft modifications will be needed to convert from a half round CV assembly to a flanged CV assembly.

Use NEA-5324 to use with 2.680 female pilot flange yokes
Part has 3 bolt patterns - 4x .50 on 4.25 BC, 4x M12 on 4.25 BC, 4x M12 on 3.50 BC. All are square pattern.

This part is a member of the following categories:

Search by Application * Search by Transfer Case * Borg Warner * 1356
Search by Category * Companion Flanges * Splined Bore * 31 Splines * Ø1.406 - 31 Involute Spline

U-Joint Series		1330
Spline Major Diameter	D	1.406
Spline Count		31.000
Spline Type		Involute Spline
Pilot Bore Diameter	C	2.000-M
Bolt Circle Diameter	B	4.250
Bolt Circle Hole Diameter (D = Drilled, T = Tapped)		.500 D
Number of Holes		4.000
Brake Pilot Diameter		0.000
Ground Hub Diameter	E	1.886
Length Thru Bore	F	2.000
Flange Face to End of Hub	G	2.625
Bare Flange Part Number (if assembly)
Slinger Part Number (if assembly)
Notes		Part has 3 bolt patterns - 4x .50 on 4.25 BC, 4x M12 on 4.25 BC, 4x .50 on 3.50 BC. All are square pattern.