| |
|
|
|
|
Northern Drivetrain 00165-2
|
| |
|
Quantity in Basket:
None
Code: NDT-00165-2
Price: $116.81
10 In Stock
|
| |
Rockwell 1550/1610 flange to Tube Yoke Adapter
Can adapt to 1480, 1550, 1610 series
|
This tube yoke adapter allows the building of a flange yoke with a +forged weld yoke end and a billet steel flange with a typical Rockwell 2-1/2 ton pattern of 3.75 male pilot and 4.75 bolt circle. Any tube yoke designed to fit a 3.5 x .095 tube will work, but we have already found the most likely tube yoke to pair the adapter with depending on what u-joint size you would like to run:
1480 - SPI-3-28-567, max angle 22 deg. (NDT-00165 is recommended for 1480)
1550 - SPI-4-28-417, max angle 35 deg.
1610 - SPI-5-28-167, max angle 35 deg.
If you need smaller joints than 1550, then see NDT-00165.
This part is a member of the following categories:
Search by Category * Driveshaft Components * Adapters
| U-Joint Series |
|
|
| Bore Diameter |
D |
3.322 |
| Keyway Size |
K |
0.000 |
| Flange Diameter |
A |
5.875 |
| Pilot Bore Diameter |
C |
3.750-M |
| Bolt Circle Diameter |
B |
4.750 |
Bolt Hole Diameter
(D = Drilled, T = Tapped) |
|
.508-D |
| Number of Holes |
|
4.000 |
| Ground Hub Diameter |
E |
0.000 |
| Length Thru Bore |
F |
0.975 |
| Notes |
|
Flange to tube yoke adapter. Thru dim is face to point of weld height. |
|
| |
|
