|
|
|
*** Fits 32 spline Borg Warner 1356 and 1345 output shafts w/2.4 thru bore. Has counterbore ***
Northern Drivetrain 00255
|
|
|
Quantity in Basket:
None
Code: NDT-00255
Price: $197.68
1 In Stock
|
|
Companion Flange - Splined Bore 1330 series, Ø1.378x32 spline, Ø1.885 hub diameter 4.25 and 3.50 BC, Ø2.00-M pilot
|
This flat flange can be used to replace a broken 1330 or other front CV yoke on the 32 spline Borg Warner 1356 and 1345 transfer case that are 2.4" through the bore. It also fits the Borg Warner 4407 frount output shafts. Check your spline counts and length through the bore carefully, as shorter yokes and 31 splines were also used. Driveshaft modifications will be needed to convert from a half round CV assembly to a flanged CV assembly. Use NEA-5324 to use with 2.680 female pilot flange yokes Part has 3 bolt patterns - 4x .50 on 4.25 BC, 4x M12 on 4.25 BC, 4x M12 on 3.50 BC. All are square pattern.
This part is a member of the following categories:
Search by Application * Search by Transfer Case * Borg Warner * 1356
Search by Category * Companion Flanges * Splined Bore * 32 Splines * Ø1.401 - 32 Involute Spline

U-Joint Series |
|
1330 |
Spline Major Diameter |
D |
1.378 |
Spline Count |
|
32.000 |
Spline Type |
|
Involute Spline |
Pilot Bore Diameter |
C |
2.000-M |
Bolt Circle Diameter |
B |
4.250 |
Bolt Circle Hole Diameter (D = Drilled, T = Tapped) |
|
.500 D |
Number of Holes |
|
4.000 |
Brake Pilot Diameter |
|
0.000 |
Ground Hub Diameter |
E |
1.886 |
Length Thru Bore |
F |
2.400 |
Flange Face to End of Hub |
G |
3.025 |
Bare Flange Part Number (if assembly) |
|
|
Slinger Part Number (if assembly) |
|
|
Notes |
|
Part has 3 bolt patterns - 4x .50 on 4.25 BC, 4x M12 on 4.25 BC, 4x .50 on 3.50 BC. All are square pattern. |
|
|
|